Update Guide
5
On page 153, the “1–2C: Save Combi/Prog” operation now allows you
to save specified individual banks of Programs and Combinations.
Change the explanation and procedure to read as follows:
All combinations, programs, and drum kits from internal memory, in addition
to the global parameters, will be saved to disk as a .PCG file (diagram ‘
a
’ on
page 149). You can specify the program and combination banks that will be
saved.
This command is valid only if the current directory is a DOS directory.
Add the following messages to “Messages” on pages 160, 162 and 163.
A
Audio tracks were skipped
N
No items were selected
T
There is no readable data
1
When this command is selected, the
dialog box at right will appear.
2
Press the text edit button to access the
text entry dialog box, and specify the
filename (
☞
Basic Guide, page 6).
3
Check the check boxes for the data
items that you wish to save.
Combinations consist of programs,
and some programs use a drum kit as
their sound source.
As necessary, when saving combinations you should also save the programs
used by those combinations, and when saving programs you should also
save the drum kits used by those programs.
4
To save the data press the
OK button
. To cancel saving, press the
Cancel but-
ton
.
Situation:
On a
TRINITY series
instrument which does not have the
HDR-TRI
option, you attempted to load a file that included an audio track, and
the data was loaded without the audio track.
Situation:
In the Save All or Save Combi/Prog dialog box, no check boxes were
checked.
Situation:
On a
TRINITY series
instrument which does not have the
PBS-TRI
option, you attempted to load a file which contained only banks C
and D.