3–1: Filter 1 A/B (Filter 1A/Filter 1B)
27
3–1D: Copy Filter
This command copies the settings of filter 1A to filter 1B, or the settings of filter 1B to filter 1A.
3–1E: Sync Filter AB (check command)
If this is checked, filters 1A and 1B will be edited simultaneously. (When you edit one filter, the
settings of the other filter will also change.)
By setting “3–1a: Routing” to serial and making the same settings for filters 1A and 1B, you can
create a sharper filter cut.
To Next Page
Loading...
