Korg Volca Beats - Connect audio output

volca beats System Firmware Update Instructions
2
System version 1.00, 1.01 or 1.02
If the current system is version 1.00,1.01 or 1.02, the display will be lit as shown. Your volca beats is
not up to date. Proceed to step 3.
System version 1.03
If the current system is version 1.03, the display will be lit as shown. Your volca beats is already up to
date.
3. Connect the audio output of your playback device to the SYNC IN connector on your volca beats.
ver. 1.00
v
er. 1.01
v
er. 1.02
v
er. 1.03