Parameter list Double-size algorithms
27
Type 3:
33 Cajon, 34 Djembe,
35 Bass Drum + Snare Drum 1,
36 Bass Drum + Snare Drum 2
These algorithms are appropriate for percussion in which
a single instrument produces two sounds, such as a
cajon.
hd1: Switching
000...100
This parameter specifies the mix between the two PCM
instruments that are switched according to the tone or
position of your strike. With a setting of 100, the two are
completely separated.
hd2: PCM Balance
–50...50
This parameter specifies the volume balance between the
two PCM instruments. With a setting of 0, they will have
the same volume. Negative (-) settings make PCM1
louder, and positive (+) settings make PCM2 louder.
hd3: Alg-PCM Balance
–50...50
Adjust the volume balance between the algorithm and
the PCM instrument. With a setting of 0, they will have
the same volume. Negative (-) settings make the algo-
rithm louder, and positive (+) settings make the PCM
louder.
hd4: Curve
000...100
This parameter adjusts the response of the shell to your
strike, and the resonance of the shell.
hd5: Brightness
000...100
Increasing this value will increase the high-frequency
components of the shell sound and the snare sound.
hd6: Snappy Decay
000...100
This parameter adjusts the decay time of the sound of the
snare.
hd7: Snappy Level
000...100
This parameter adjusts the level of the sound of the
snare.
hd8: Shell Type
0...4
Choose one of five types of tonal character for the shell.
Default Value
No. Tune Decay hd1 hd2 hd3 hd4 hd5 hd6 hd7 hd8
27
50 36 30 0005450 48 24
28
57 29 50 0-3228 85 74 9 51
29
50 56 50 0-1614 34 64 66 2
30
50 56 50 0-200883 60 2
31
49 56 50 0-2012 34 47 62 3
32
54 60 30 0-4235 8 002
33
50 62 55 0-3527 6 55 56 1
34
53 58 46 0-40018002
35
56 52 32 0-3427 16 75 30 3
36
54 38 32 0-3616 9 85 32 2
To Next Page
Loading...
