12
Parameter list
Edit 1 ( Ed1)
For details on how to access parameters, refer to “Basic
editing procedure” (See page 8).
* In the list below, “S” and “D” indicate explanations for
single-size and double-size algorithms respectively. The
available parameters will differ depending on whether
Edit 1 mode 5. Algorithm Select (
ALG) is set to a sin-
gle-size algorithm 01...26 or a double-size algorithm
27...36. With the exception of 10. Reverb ( rEU) and 11.
Delay (dLY), the items of Button 2–4 are shown as “--
-
” and cannot be edited.
Page#.
Parameter
Button 1 Button 2 * Button 3 * Button 4 *
1. Tune
(
tun
)
hd. A 000. . .100
S*: Specifies the pitch of
the head algorithm.
D*: Specifies the pitch of
the algorithm. (See
page 9)
hd. P -24. . . 24
S*: Specifies the pitch of
the head PCM instrument
in semitones (100 cents).
The range is 4 octaves up
or down.
D*: ---
r . A 000. . .100
S*: Specifies the pitch of
the rim algorithm. (See
page 9)
D*: ---
r . P -24. . . 24
S*: Specifies the pitch of
the rim PCM instrument
in semitones (100 cents).
The range is 4 octaves up
or down.
D*: ---
2. Decay
(
dcy
)
hd. A 000. . .100
S*: Specifies the decay
time for the sound of the
head algorithm.
D*: Specifies the decay
time for the sound of the
algorithm. (See page 9)
hd. P -99. . . 99
S*: Specifies the decay
time for the sound of the
head PCM instrument.
D*: ---
r . A 000. . .100
S*: Specifies the decay
time for the sound of the
rim algorithm.
(See page 9)
D*: ---
r . P -99. . . 99
S*: Specifies the decay
time for the sound of the
rim PCM instrument.
D*: ---
3. Level
(
LEU
)
hd. A 000. . .100
S*: Specifies the volume
of the head algorithm.
D*: Specifies the vol-
ume of the algorithm.
hd. P 000. . .100
S*: Specifies the volume
of the head PCM instru-
ment.
D*: ---
r . A 000. . .100
S*: Specifies the volume
of the rim algorithm.
D*: ---
r . P 000. . .100
S*: Specifies the volume
of the rim PCM instru-
ment.
D*: ---
4. Pan
(
Pan
)
hd. A L50. . . r50
S*: Specifies the pan of
the head algorithm. L
values place the sound to
the left, r values to the
right, and 00 places the
sound in the center.
D*: Specifies the pan of
the algorithm.
hd. P L50. . . r50
S*: Specifies the pan of
the head PCM instru-
ment.
D*: ---
r . A L50. . . r50
S*: Specifies the pan of
the rim algorithm.
D*: ---
r . P L50. . . r50
S*: Specifies the pan of
the rim PCM instrument.
D*: ---
5.
Algorithm
Select
(
ALG
)
hd. A 01. . . 36
Selects the algorithm.
(See page 16, 26)
01...26: Single-size
algorithm for the head.
27...36: Double-size
algorithm.
hd. P 001. . . 100
S*: Selects the head
PCM instrument. (See
Voice Name List)
D*: ---
r . A 01. . . 25
S*: Selects a single-size
algorithm for the rim
(See page 16). However
26 1812 cannot be
selected.
This can be selected only
if a single-size algorithm
is selected for the
hd. A
parameter at left.
D*: ---
r . P 001. . . 100
S*: Selects the rim PCM
instrument. (See Voice
Name List)
D*: ---
6. Velocity
Curve
(
U. Cr
)
---
hd. P 0 . . . 9
S*: Selects a curve that
determines how the vol-
ume or tone of the head
PCM instrument will be
affected by how strongly
you strike the head. (See
diagram below.)
D*: ---
---
r . P 0 . . . 9
S*: Selects a curve that
determines how the vol-
ume or tone of the head
PCM instrument will be
affected by how strongly
you strike the rim. (See
diagram below.)
D*: ---
To Next Page
Loading...
