Need help?Do you have a question about the Korg R3 and is the answer not in the manual?
General| Polyphony | 8 voices |
|---|---|
| Oscillators | 2 oscillators per voice |
| LFO | 2 LFOs |
| Arpeggiator | Yes |
| Vocoder | 16-band vocoder |
| MIDI | In, Out, Thru |
| Power | AC adapter |
| Type | Synthesizer |
| Synthesis Type | Virtual Analog |
| Effects | Modulation effects, Delay, Reverb |
| Keyboard | 37 keys |
| Inputs | Audio input, Mic input |
| Outputs | 2 x 1/4" (L/Mono, R) |
| USB | Yes |
| Weight | 2.8 kg |
| Filter | Multi-mode filter (LPF, HPF, BPF) |
Details on locations that can cause unit malfunction due to sunlight, temperature, dust, or vibration.
Instructions for connecting the AC adapter to the correct voltage outlet.
Overview of the Multi Modeling Technology synthesis engine and its waveform capabilities.
Details on the R3's 16-band vocoder and Formant Motion feature for vocal effects.
Description of modulation sequencers for time-varying parameter changes.
Details on the two-band EQ and insert effects per timbre, plus master effect.
Overview of the R3's arpeggiator with six types and step editing.
Information about the included software for editing R3 parameters via computer.
Explanation of a synthesizer program's structure: two timbres, master effect, arpeggiator.
Details on the structure of each timbre: Synth, EQ, Insert FX, Oscillator, Mixer, Filter, Amp, Drive/WS.
Explanation of Virtual Patch for modulation and Modulation Sequencer functions.
Details on Equalizer, Insert Effects, Master Effect, and Arpeggiator within program structure.
How the vocoder analyzes and applies spectral character using 16 bands.
Explanation of the modulator (voice) and carrier (waveform) signals in vocoding.
Description of MIC, AUDIO INPUT 1 & 2 jacks and their associated level knobs.
Overview of TEMPO knob, ARPEGGIATOR buttons, and TIMBRE SELECT buttons.
Controls for VOCODER, BANK/PROGRAM SELECT, OCTAVE, PITCH/MOD wheels.
Functions of [WRITE], [EXIT] buttons, Main display, Sub-displays, and editing knobs.
Description of OUTPUT [L/MONO], [R] jacks and the PHONES jack.
Details on MIDI IN, OUT, THRU connectors and the USB connector.
Explanation of AUDIO INPUT 1 & 2 jacks and the MIC/LINE switch.
How to connect the R3's audio outputs to mixers or monitor systems.
Connecting external sources to AUDIO INPUT 1 and 2 for vocoder or synth use.
Guidelines for connecting the R3 to external MIDI devices for sound control.
Instructions for connecting the AC adapter before powering on.
Using knobs, wheels, and keyboard playing to modify sounds in realtime.
Instructions for activating and using vocoder programs with a microphone.
Adjusting vocoder sound using performance controls and Edit parameters.
How to use and adjust the arpeggiator's type, duration, and other parameters.
Procedure for recording modulation sequence data using Play mode.
Steps for recording modulation sequence data using Edit mode.
Procedure for recording, saving, and using formant motion data.
Two basic methods for creating sounds: tweaking existing or starting from scratch.
Editing carrier signal parameters and modulator input settings.
Adjusting arpeggiator type, duration, note value, swing, tempo.
Choosing oscillator 1 waveforms and modulation types (Waveform, Cross, Unison, VPM).
Setting the cutoff frequency and resonance for Filter 1.
Selecting modulation sources, destinations, and specifying effect intensity.
Selecting which timbre(s) are sounded and the arpeggio type.
Shifting cutoff frequencies of carrier band-pass filters with Formant Shift/Fc Offset.
Setting resonance for band-pass filters and sensitivity for envelope followers.
Adjusting overall tuning, pitch transpose, and selecting velocity response curves.
Connecting external MIDI tone generators and computers to the R3.
Setting the R3's MIDI channel and configuring multi-timbral operation.
Using the R3 as master or slave for MIDI clock synchronization.
Mapping MIDI Control Change numbers to front panel controls for parameter editing.
Procedures for saving program, global, MIDI, and formant motion data.
Procedure to restore the R3's programs and global data to factory-set condition.
How to enable or disable the write protect setting to prevent accidental memory changes.
Troubleshooting guide for power, no sound, and input signal issues.
Solutions for power, no sound, and input signal issues.
Troubleshooting guide for editing, saving programs, and arpeggiator not starting.
Troubleshooting for editing errors, program write failures, and arpeggiator issues.
Troubleshooting MIDI message reception and recognition problems.
Troubleshooting MIDI message reception, recognition, and channel configuration problems.
To Next Page
