Korg ZERO4 - GUITAR Input Test

・
Confirmation of GUITAR INPUT
(
TRS
)
*This check uses D3200,
instead of a guitar.
C
onnect the ZERO4 and the D3200 like following.
If you have a guitar, please use it.
ZERO4 GUITAR terminal - D3200 MASTER L
Set the MASTER FADER of the D3200 to "20".
Set the CH1,2,3,4
INPUT SELECTORs to "GUITAR".
P
ress the PLAY switch of D3200. (Demo song starts.)
Set the
C
H1 CH FADER to "10".
Y
ou can hear the demo song of the D3200 through the headphones,
confirm that there is
not
noise and fragmentary sound.
Set the
C
H1 CH FADER to "0".
Set the
C
H2 CH FADER to"10".
Confirm that there is no
t
noise and fragmentary sound.
Set the
C
H2 CH FADER to "0".
Set the
C
H3 CH FADER to"10".
Confirm that there is no
t
noise and fragmentary sound.
Set the
C
H3 CH FADER to "0".
Set the
C
H4 CH FADER to"10".
Confirm that there is no
t
noise and fragmentary sound.
Set the
C
H4 CH FADER to "0".
P
ress the STOP switch of the D3200. Then the demo song stops.
P
ressing the STOP of the D3200, press the REW. (the song returns to the top.)
P
ull out the cables which are connected.
KORG INC.
8／102007/4/23
QCI-5800 Page
ZERO4 (X-5800) Check before Shipping
Revised
No.
Date