33
GB - Instructions for use and maintenance
Quadrat
Cleaning the “compensation channel”
(freestanding version)
To access the “duct” in the “freestanding” version, it
is necessary to lift the whirlpool cover.
4 people are required for this task.
(built-in version)
To access the “duct” in the “built-in” version, it is
necessary to lift the whirlpool cover.
Proceed as shown in the gure.
Main errors displayed
on the keyboard
x4
Display Problem Solution
Filling error Check the water present and
lling solenoid valve
Temperature detec-
tion error
Check that the temperature
sensor is working correctly
Filling error. The
minipool has still not
reached the required
level after 2 hours
Check: that there are no
leaks, the power supply of
the water present and lling
solenoid valve
Flow error Clean the lter
Check the wiring
Check the lter pump.
Check the channel level
sensor
freestanding
version
built-in
version
To Next Page
Loading...