Kozi XL 100 User Manual (English)

Other manuals for Kozi XL 100

Owner's Manual40 pages

Removal And Installation6 pages

Questions and Answers:

M
milleradamAug 8, 2025
What to do if my Kozi Indoor Fireplace won't light?
- R
  Ray MoralesAug 8, 2025
  If your Kozi Indoor Fireplace won't light, several factors could be the cause. First, ensure that the hopper has enough pellet fuel. If the fuel supply is adequate, check the burn pot for cleanliness and clean it if necessary. Also, inspect the fuse and replace it if it's blown. Furthermore, examine the igniter to ensure it hasn't slipped out of the igniter tube; if it has, push it back into place. If the igniter is correctly positioned but still not working, it may have failed and require replacement. Finally, if there's no power to the igniter, consider replacing the MX2 Control Board.
A
Amanda BallAug 12, 2025
Why my Kozi Indoor Fireplace heater will not feed pellets?
- K
  Kimberly WilliamsAug 12, 2025
  If your Kozi Indoor Fireplace heater isn't feeding pellets, start by checking if the heater is properly plugged in and that the electrical outlet has power. Next, examine the exhaust vent and exhaust fan for any blockages, and clean them if necessary. Also, inspect the exhaust passage and exhaust box pressure tap for obstructions and clean them. A cracked or broken pressure switch tube can also cause this issue, so replace it if needed. If the problem persists, the pressure switch or exhaust fan may have failed and require replacement.
J
Jason FletcherAug 16, 2025
What to do if Kozi Indoor Fireplace stove won't turn off?
- R
  Rebecca GrayAug 17, 2025
  If your Kozi Indoor Fireplace stove won't turn off, first, consider whether the stove is in "Cool Down" mode and allow sufficient time for it to cool down. If the stove remains on, the exhaust fan thermal disk may have failed and require replacement. As a last resort, the MX2 Control board may have failed and require replacement.