Note:
1) Dash cam will turn off when car engine is turned off. In order to record video when
parks, a hardwired kit is required to connect dash cam to car fuse box to power dash
cam when engine is off.
2) To avoid compatibility issues, please use the T36 original hard wire kit (Contact us or
visit KQQ store)
6. Introduction of Functions
Please read the Instructions before Installation and Operating.
6.1 FAQ
1) If the machine cannot be turned on after the power is turned on, please keep the power
on and reset the machine. Please CONTACT US if it still doesn't work.
2) Please confirm whether your cigar power port is ACC (if the cigarette lighter is still
charged after the car is turned off, please use the hard wire kit, otherwise it may
exhaust your car's power supply).
Want the hard wire kit, please CONTACT US via Email：
LESA_1688@163.com
6.2 Introduction A - Main Functions
1) Mirror dash cam switch:
This product is installed with the standard car charger, and the ignition is turned on; when
the ignition is turned off, it is turned off or pressed “on/off” (car charger power supply, long
press the “on/off” for 3 seconds to turn on/off the dash camera, short press to turn off / turn
on the screen).
2) Quickly turn off the screen
Press the "power button" to turn off the LCD backlight. (Tap the screen or press the power
button to turn on the LCD backlight)
To Next Page
