Tips 2 for rebooting the system: Enter the menu → Select “ Factory format ” → Select “
Confirm ” (Note: The Tips 2 above will restore the initial parameter settings of the product,
after which you can reset the parameters again)
3) Don't pull too hard when routing cables of dash cam. Ensure all cables connected
correctly and all ports plugged in completely before powering.
4) After Installation: The functions and display of dash cam works normally before
installing, but it can't work after installing. So there may be a problem with installation.
Please check the connection of cables and ports again.
5) DON'T destroy or modify the original wiring without permission. If cables are damaged
during installation, cables MUST be replaced.
6) Scan the QR Code to CONTACT US
5.2
How to hide power cable inside your car’s dash board?
Many people on YouTube already demonstrated how and where to hide power cable inside
your car. You can view one of the possible ways on the link, this video is NOT recorded by
us. https://youtu.be/xwD8Ilk-MHU,
Or Scan the QR Code to watch
5.3 Dash Cam Rear view Mirror Installation:
1) Turn off dash cam. Insert TF card into TF card slot.
2) Note: Don’t remove TF card when dash cam is turned on. It will damage TF card and
its data
3) Mount T36S mirror dash cam over the original car rear view mirror with the provided
rubber straps. Then adjust the angle.
To Next Page
Loading...
