Kraft Powercon PRX Series User Manual

KraftPowercon Sweden AB, Hjalmar Petris väg 49, 352 46 Växjö, Sweden, Tel: 0470-705200, Fax: 0470-705201,
www.kraftpowercon.com
You must read this manual before installation, use or work on the product.
This product contains dangerous voltage that when touched can cause electric shock, burns
or death.
The product must be installed by qualified personnel and according to the installation
instructions. Service may only be performed by authorised service personnel. The equipment
may only be opened by qualified personnel. Work in addition to replacing the rectifier modules
may only be carried out when all power has been cut to the equipment and when the mains
breaker has been closed for at least five minutes. The protective covers and contact safety
devices inside the equipment may only be removed by authorised service personnel.
The power must always be disconnected in a safe way before starting any
service/maintenance.
WARNING! Multiple power sources. Dangerous voltage is possible even with mains power
shut off. The panel mains power switch does not give a dead condition.
Manual for
charging rectifier
type PRX
SAFETY INSTRUCTIONS
Dokumentnr: 9-1719-B
Artikelnr: 0001137

Kraft Powercon PRX Series Specifications

General

Brand	Kraft Powercon
Model	PRX Series
Category	Control Unit
Language	English

Summary

2 SAFETY INSTRUCTIONS

4 FUNCTIONAL DESCRIPTION

4.1 GENERAL

Overview of the PRX rectifier and its monitoring unit.

5 OPERATION

5.1 GENERAL

Overview of operation via the monitoring unit.

6 INSTALLATION INSTRUCTIONS

6.1 SAFETY INSTRUCTIONS

Critical safety warnings during installation.

6.2 GENERAL

Notes on using this manual with the monitoring unit manual.

6.4 MOUNTING

6.5 ELECTRICAL INSTALLATION

Detailed steps for electrical connections and wiring.

7 COMMISSIONING

7.1 SAFETY INSTRUCTIONS

Safety precautions to be taken during commissioning.

7.2 PREPERATORY INSPECTION

7.3 ELECTRIFICATION

Procedures for connecting DC and AC power.

7.4 CHECK OF CHARGING VOLTAGE

8 MAINTENANCE

8.1.1 General

General guidelines and references for maintenance.

8.1.2 Check of charging voltage

9 FAULT TRACING

9.1 SAFETY INSTRUCTIONS

Safety guidelines for fault tracing procedures.

9.2 OTHER FAULT TRACING