Why my KRAFT Washer cannot start up?
If your KRAFT Washer isn't starting, make sure the door is completely closed, the power plug is properly inserted, the water supply tap is open, and you've pressed the “Start/Pause” and “On/Off” buttons.
Why is my KRAFT Washer leaking water?
If your KRAFT Washer is leaking water, check that the connections between the inlet pipe or outlet hose and the tap or washing machine are tight. Also, the drain pipe in the room might be blocked. Clean the outlet hose, and if necessary, ask a specialized person to repair it.
What to do if my KRAFT Washer has water injecting problem while washing?
If your KRAFT Washer is not injecting water properly, ensure the tap is fully open and the water supply is normal. Also, check the inlet valve filter for blockages and straighten any twists in the inlet pipe. Verify that other taps in the room are working correctly.
Why is water overflowed from the bottom of my KRAFT Washer?
If water is overflowing from the bottom of your KRAFT Washer, ensure the inlet pipe is firmly connected. If the outlet hose is leaking, replace it.
What to do if my KRAFT Washer has drain problem while washing?
If your KRAFT Washer has a drain problem, check the outlet hose for blockages or twists, and wash and straighten it. Also, wash the drain pump filter.
What to do if the door of my KRAFT Washer cannot be opened?
If the door of your KRAFT Washer cannot be opened, it is likely due to the machine's safety protection design. Disconnect the power to resolve this.
How to fix door lock problem in KRAFT Washer?
If you are experiencing a door lock problem with your KRAFT Washer, it might be because the door is not closed properly. Try restarting the washer after ensuring the door is securely closed.
What to do if the water level in drum exceed a certain level for alarm in KRAFT Washer?
If the water level in the drum of your KRAFT Washer exceeds a certain level and triggers an alarm, it indicates a water overflow. Restart the washer to resolve this issue.
Why indicator or display does not light on my KRAFT Washer?
If the indicator or display on your KRAFT Washer does not light up, check if the power is shut down and the power plug is correctly connected. If the issue persists, please call up service line.
What to do if my KRAFT Washer has heating fault?
If your KRAFT Washer has a heating fault due to a damaged NTC or aging heating pipe, you can still wash clothes normally, but without heating. Contact the service center promptly.
Safe usage guidelines for children and individuals with reduced capabilities.
Precautions to prevent electrical shock during operation and maintenance.
Step-by-step guide to removing transit bolts before installation.
Criteria for choosing a suitable and safe location for the washing machine.
To Next Page
General
