ASSEMBLY
ATTACHING THE DUST BAG
Align the groove in the dust bag assembly with the groove in the vacuum port (see FIG. 4),
and then press down on the dust bag assembly to lock it in place.
OPERATION INSTRUCTIONS
SANDPAPER
This 1/4 sheet sander is designed to be used with standard, commercially available sandpa-
per sheets. Cut the sheet crosswise into quarters for a precise fit.
Aluminum oxide, silicon carbide, or other synthetic abrasives are recommended for power
sanding use. For rough sanding, sandpaper with a coarse grit is best. For smoothing or final
sanding, sandpaper with a fine or extra-fine grit should be used.
TM
FIG. 4
KRAFTtech PS160CA-3 Page 8
To Next Page
Loading...