Kramer ASPEN-32UFX - Page 51

Kramer Electronics Ltd.
ASPEN-32UFX, ASPEN-1616UX, VS-8UFX – Protocol 3000
49
SIGNALS-LIST
Command Name
Permission
Transparency
Set:
–
–
–
Get:
SIGNALS-LIST?
End User
Public
Description
Syntax
Set:
–
–
Get:
Get signal ID list of this device
#SIGNALS-LIST?␍␊
Response
~nn@SIGNALS-LIST␠[signal_id,..,]␍␊
Parameters
signal_id – format for identifying specific ports: OUT/IN.SDI.X.VIDEO.1 (X = port/input/output # as
written on the device panel), for example, IN.SDI.1.VIDEO.1 (PORT/INPUT 1),
OUT.SDI.5.VIDEO.1 (PORT/OUTPUT 5).
Response Triggers
Notes
The response is returned in one line and terminated with ␍␊
The response format lists signal IDs separated by commas.
This command returns all possible signals for the device, therefore, for the devices with interchangeable
ports it returns 2 signal ids for each physical port, one as an input and one as an output.
This is an Extended Protocol 3000 command.
Example
Get signal ID list for this device:
#SIGNALS-LIST?<CR>