Kramer ASPEN-32UFX

Kramer Electronics Ltd.
ASPEN-32UFX, ASPEN-1616UX, VS-8UFX – Protocol 3000
34
Example illustrating brackets and commas:
#SIGNALS-LIST?
~01@SIGNALS-LIST
[IN.SDI.1.VIDEO.1,IN.SDI.2.VIDEO.1,IN.SDI.3.VIDEO.1,IN.SDI.4.VIDEO.1,IN.SDI.5.VIDEO.1
,IN.SDI.6.VIDEO.1,IN.SDI.7.VIDEO.1,IN.SDI.8.VIDEO.1,OUT.SDI.1.VIDEO.1,OUT.SDI.2.VID
EO.1,OUT.SDI.3.VIDEO.1,OUT.SDI.4.VIDEO.1,OUT.SDI.5.VIDEO.1,OUT.SDI.6.VIDEO.1,O
UT.SDI.7.VIDEO.1,OUT.SDI.8.VIDEO.1]
Protocol 3000 Commands
This section includes the following commands:
• System Commands on page 34.
• Authentication Commands on page 44.
• Switching/Routing Commands on page 47.
• Video Commands on page 51.
• Communication Commands on page 52.
System Commands
Command
Description
#
Protocol handshaking
BUILD-DATE
Get device build date
FACTORY
Reset to factory default configuration
HELP
Get command list
LOCK-FP
Get front panel lock state
LOG-TAIL
Get the last “n” lines of message logs
MODEL
Get device model
NAME
Set/get unit name
NAME-RST
Reset unit name to factory default
PORT-DIRECTION
Set port direction for video port
PROT-VER
Get device protocol version
PRST-LOCK
Set/get a preset as read-only
PRST-RCL
Recall saved preset list
PRST-STO
Store current connections to preset
RESET
Reset device
SN
Get device serial number
VERSION
Get device firmware version