Kramer VM-4HC - Connecting the VM-4 HC 1:4 HDMI Distributor; Connecting the VM-4 HC

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VM-4HC 1:4 HDMI Distributor
6
5 Connecting the VM-4HC 1:4 HDMI Distributor
This section describes:
• Connecting the VM-4HC (see Section
5.1)
• Acquiring the EDID (see Section
5.2)
5.1 Connecting the VM-4HC
Figure 3: Connecting the VM-4HC 1:4 HDMI Distributor
To connect
1
the VM-4HC as illustrated in the example in Figure 3:
1. Connect
2
the HDMI source, for example, a DVD player to the INPUT
connector.
1 Switch off the power to each device before connecting it to your VM-4HC. After connecting your VM-4HC, switch on its
power and then switch on the power to each device
2 Using the Kramer HDMI copper cables