Kramer VP-12NHD - 7 Technical Specifications; Table 4: Technical Specifications of the VP-12 NHD 1:12 + 3 UXGA; CAT5 Distributor

Technical Specifications
11
7 Technical Specifications
Table 4 includes the technical specifications:
Table 4: Technical Specifications
1
of the VP-12NHD 1:12 + 3 UXGA / CAT5 Distributor
2
INPUT: 1 UXGA on an HD15F connector
OUTPUTS: 12 UXGA on HD15F connectors
3 RJ-45 OUT connectors
MAX. OUTPUT LEVEL
3
: UXGA: 1.8Vpp; CAT5: 1.6Vpp
BANDWIDTH (-3dB)
4
: UXGA: 340MHz; CAT5: 150MHz
DIFF. GAIN: 0.17%
DIFF. PHASE: 0.44°
K-FACTOR: <0.05%
S/N RATIO: 73dB
CONTROLS: Level: -0.8dB to 2.4dB, 2 switches for sync inversion
COUPLING: UXGA: DC; CAT5: AC
POWER SOURCE: 230 VAC, 50 / 60 Hz (115VAC, U.S.A.) 31VA
DIMENSIONS: 19 inch (W), 7 inch (D) 1U (H) rack mountable
WEIGHT: 2.7 kg. (6 lbs.) approx.
ACCESSORIES: Power cord
1 Specifications are subject to change without notice
2 Specifications are shown for the UXGA output, unless stated otherwise
3 The CAT5 output is measured at the TP-120 output, at maximum TP-120 gain of the TP-12N and the TP-120 setup
4 The CAT5 output is measured at the TP-120 output on the TP-12N and the TP-120 setup