Kramer VP-425

VP-425 – Overview
5
3.1 Defining the VP-425 PC / Component to HDMI Scaler
Figure 1: VP-425 PC / Component to HDMI Scaler
#
Feature
Function
1
PROGRAM USB Connector
For firmware upgrade
2
PC / COMPONENT INPUT
15-pin HD Connector
Connects to a PC or component source
3
AUDIO INPUT
LEFT
Connects to an unbalanced stereo audio source
4
RIGHT
5
HDMI OUT Connector
Connects to an HDMI acceptor
6
5V DC
+5V DC connector for powering the unit
7
ON LED
Lights green when the unit is powered on
8
COMPONENT IN LED
Lights blue when a component (YPbPr) signal is
detected on the input
9
MENU Button
Press to enter/escape the on-screen display (OSD)
menu.
Press together with the – button to reset to 720p
10
ENTER Button
In the OSD, press to choose the highlighted menu item.
Press together with the + button to reset to XGA
11
- Button
In the OSD, press to move backward through the list or
to decrement the parameter value
12
+ / FREEZE Button
In the OSD, press to move forward through the list or to
increment the parameter value.
When not in the OSD, press to freeze the display