Kramer VP-426 - Figure 1: VP-426 HDMI-PC Scaler

VP-426 - Overview
5
Figure 1: VP-426 HDMI-PC Scaler
#
Feature
Function
1
ON LED
Lights green when the unit is powered on
2
INPUT Button
Press to toggle the input between HDMI and PC
3
HDMI LED
Lights when the HDMI input is selected
4
PC LED
Lights when the PC input is selected
5
MENU Button
Press to enter/escape the on-screen display
(OSD) menu. Press together with the – button to
reset to 720p
6
ENTER Button
In OSD, press to choose the highlighted menu
item. Press together with the + button to reset to
XGA
7
– Button
In OSD, press to move backward through the list
or to decrement the parameter value
8
+/FREEZE Button
In OSD, press to move forward through the list or
to increment the parameter value. When not in
OSD, press to freeze the display
9
PROG USB Connector
Connects to a PC for programming upgrade
10
PC IN 15-pin HD Connector
Connects to a PC computer graphics source
11
AUDIO IN PC 3.5mm Mini Jack
Connects to an unbalanced stereo PC source
12
AUDIO IN HDMI 3.5mm Mini Jack
Connects to an unbalanced stereo HDMI source
13
HDMI IN Connector
Connects to an HDMI source (if there is no video
input, audio is disabled)
14
PC OUT 15-pin HD Connector
Connects to a PC computer graphics acceptor
15
AUDIO OUT 3.5mm Mini Jack
Connects to an unbalanced stereo audio
acceptor
16
HDMI OUT Connector
Connects to an HDMI acceptor
17
REMOTE Terminal Block
Connects to remote contact closure switches
18
5V DC
+5V DC connector for powering the unit