Kramer VP-470 - Example: Setting a Parameter

VP-470 - Operating the VP-470 SD / 3G HD-SDI Scaler
9
9
5.2.1 Example of Setting a Parameter
To set the value of the brightness on the display output to 46:
1. From normal operation, press MENU.
The OSD main menu appears on the screen.
2. Press the + or – button to select PICTURE.
The PICTURE line background changes to blue.
3. Press ENTER.
The PICTURE submenu is displayed.
4. Press the + or – button to select BRIGHTNESS.
The BRIGHTNESS line background changes to blue.
5. Press ENTER.
BRIGHTNESS and its current value change to green.
6. Press the +/- button to increase/decrease the value to 46.
7. Press ENTER to set the value.
BRIGHTNESS and its value change back to white.
8. Press MENU to exit. Alternatively, press the - button until EXIT is selected
and then press ENTER to go back in the OSD menu.