Kramer WP-872xr-EU-80/86-W

Kramer Electronics Ltd.
PT-871/2-KIT, PT-871/2xr-KIT, WP-871xr, WP-872xr, PT-871xr, PT-872xr – Defining PT-871/2-KIT, PT-
871/2xr-KIT, WP-871xr, WP-872xr, PT-871xr, PT-872xr
5
WP-871xr
US-D Version
Front
EU/UK Version
Front
US-D/EU/UK Version
Rear
Figure 5: WP-871xr Line Transmitter Wall-plate
WP-872xr
US-D Version
Front
EU/UK Version
Front
US-D/EU/UK Version
Rear
Figure 6: WP-872xr Line Receiver Wall-plate
#
Feature
Function
HDMI IN Connector (WP-871xr)
Connect to an HDMI source.
HDMI OUT Connector (WP-872xr)
Connect to an HDMI acceptor.
STATUS LED
Lights green when power is connected to the device.
Lights blue when powered and both active source and acceptor are
detected.
Ring Tongue Terminal Grounding
Screw
Connect to grounding wire (optional).
Power Supply 2-pin Terminal Block
Connector
Connect to the power adapter (if required). Connect GND to GND,
+12V to +12V.
DGKAT2 OUT RJ-45 Connector
Connect to the DGKat-2.0 IN connector on the PT-872xr or WP-
872xr using CAT 6A cable.
DGKAT2 IN RJ-45 Connector
Connect to the DGKat-2.0 OUT connector on the PT-871xr or WP-
871xr using CAT 6A cable.