Need help?Do you have a question about the Kranzle HD 9/80 and is the answer not in the manual?
General| Pressure | up to 80 bar |
|---|---|
| Flow Rate | 900 l/h |
| Water Output | 900 l/h |
| Motor Speed | 1450 rpm |
| Power Supply | Electric |
| Power Output | 2.2 kW |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Power | 2.8 kW |
Details the components and features of the high-pressure cleaners.
Lists the components included with the high-pressure cleaner.
Covers general operating rules, range of application, and oil change procedures.
Outlines accident prevention, prohibited actions, and general safety measures for operation.
Provides critical information on water and electrical supply requirements for safe operation.
Explains the water system, lance, trigger gun, and pressure control valve functions.
Guides on machine setup, location, initial checks, and starting operation.
Details how to draw water directly and use cleansing agents safely.
Provides instructions for safely shutting down the pump and storing the unit.
Addresses issues with blocked inlet sieves or nozzles causing no water output.
Covers issues with soiled valves causing low pressure or squirting water from the nozzle.
Diagnoses constant motor cycling due to leakage in the system.
Diagnoses constant motor cycling due to soiled return body or defective sealing ring.
Official declaration of the product's compliance with EU directives.
Details the warranty period, terms, and conditions for the cleaners.
Presents various accessories that enhance the versatility of the cleaners.
Shows exploded views and parts lists for HD 9/80 and HD 12/130 models.
Provides diagrams and parts for specific components like valve housing and unloader.
Details parts for the transmission and AC motor for both models.
Shows diagrams and parts for trigger guns and lances for both models.
Illustrates the electrical connections and wiring for the machine.
A template for recording labor safety inspection results for HP cleaners.
To Next Page
