Need help?Do you have a question about the Kranzle Profi 160 TST and is the answer not in the manual?
General| Max Pressure | 160 bar |
|---|---|
| Max. Permissible Overpressure | 180 bar |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Motor Speed | 1450 rpm |
| Hose Length | 10 m |
| Hose Drum | Yes |
| Motor Type | Induction motor |
Detailed list of key features and components of the Kränzle high-pressure cleaner.
Comparison of technical specifications for Kränzle Profi 160 TS T and Profi 195 TS T models.
Lists the items included in the package, such as the cleaner, spray gun, lances, and manual.
Defines the intended use and scope of the high-pressure cleaner for cleaning tasks.
Specifies mandatory annual inspections for commercial use by qualified personnel.
Highlights risks from hot parts and high-pressure water jet, emphasizing correct usage.
Details the first oil change after 50 hours and the type of oil required.
Advises on managing recoil from the high-pressure jet and using the safety catch.
Lists actions that must never be performed with the high-pressure cleaner.
Explains the risk of pump damage due to lack of water and required flow rates.
Details permissible water supply connections according to DIN EN 61770 and DVGW.
Discusses voltage drops and thin/long cables causing motor malfunctions.
Specifies requirements for sockets, fuses, and extension cables for safe electrical connection.
Explains how water is pressurized and delivered to the lance via the pump.
Describes the operation of the trigger gun and the pressure control valve-safety valve system.
Explains the motor protection switch function and troubleshooting for frequent tripping.
Details material quality, optimization, and connection requirements for hoses and spray devices.
Describes the electrical Start/Stop control and its operation with the trigger gun.
Guide on moving the cleaner, selecting a safe location, and initial checks.
Instructions for checking water inlet filter, oil level, and assembling the tiltable handle.
Steps for attaching the lance and high-pressure hose to the gun and machine.
Guidance on connecting the water hose and unwinding the high-pressure hose without kinks.
Instructions for connecting to the power supply and starting the high-pressure cleaner.
How to steplessly adjust the operating pressure using the handwheel.
Procedure for drawing water from ponds or rain butts using a suction hose.
Explains how to suck detergent directly into the pump for cleaning.
Warnings regarding solvent-based liquids and observing detergent manufacturer specifications.
Step-by-step instructions for safely shutting down the high-pressure cleaner and pump.
Advice on storing the cleaner in a place-saving manner and protecting it from frost.
Diagnosing and fixing issues when the pressure gauge shows full but no water comes out.
Instructions on checking and cleaning the water inlet filter for blockages.
Diagnosing and fixing issues with low pressure or inconsistent water flow, likely due to soiled valves.
Checklist for items to be inspected on the high-pressure cleaner for safety compliance.
Fields for recording determined and set values for various inspection parameters.
Sections for confirming safety, rectifying defects, and scheduling the next inspection.
States conformity with machinery, low-voltage, EMV, and noise directives.
Provides measured and guaranteed sound levels for different Kränzle Profi models.
Lists the harmonized standards and specifications the product complies with.
Details what is covered by the guarantee and conditions that void it.
Specifies guarantee periods for user and industrial use, and lists wear parts not covered.
Describes accessories like rotating washing brushes and underbody lances with order numbers.
Details tube cleaning hoses of various lengths and their order numbers.
Information on stainless steel sludge suckers and round cleaners with order numbers.
Details the sand blasting set specifications and order number.
Diagram showing the complete assembly of the Kränzle Profi high-pressure cleaner with numbered parts.
Lists part numbers for motor-pump units, chassis, and related fasteners for various Profi models.
Lists part numbers for accessories like detergent hose, gun, lances, and Dirtkiller nozzles.
Exploded view diagram of the integrated AM-pump valve housing with numbered components.
Lists part numbers for O-rings, valves, and valve plugs in the valve housing.
Lists part numbers for fittings, springs, and repair kits for the valve housing.
Exploded view diagram of the unloader valve and pressure switch assembly.
Lists part numbers for O-rings, springs, and seals for the unloader valve and pressure switch.
Lists part numbers for components like the pressure switch, handwheel, and repair kits.
Exploded view diagram of the motor assembly, showing its various components.
Lists part numbers for general motor components like rotors, bearings, and seals.
Lists part numbers for model-specific motor housing, cables, and capacitors.
Exploded view diagram of the transmission assembly with numbered parts.
Lists part numbers for components within the transmission assembly.
Lists part numbers for components of the hose drum assembly.
Exploded view diagram of the 'Midi' gun with lance, showing numbered components.
Exploded view diagram of the Dirtkiller lance, showing numbered parts and kits.
Schematic illustrating the electrical wiring for Kränzle Profi 160/195 TS T models (230V).
Schematic illustrating the electrical wiring for Kränzle Profi 175/15/120 TS T models (400V).
Map indicating international locations and contact points for Kränzle.
Legal statement regarding reprint rights and the document's issue date.
To Next Page