Need help?Do you have a question about the Kranzle therm 890 and is the answer not in the manual?
General| Motor speed | 1400 rpm |
|---|---|
| Connected load | 7.5 kW |
| Power Source | Electric |
| Motor Power | 7.5 kW |
| Hose Length | 10 m |
Overview of the machine's physical layout and components.
Details on how the water flows through the machine for cleaning.
Explanation of how detergent is mixed with the high-pressure jet.
Information on pressure regulation and built-in safety mechanisms.
Details on the motor's overload protection system.
How to operate and safely use the spray gun and lance.
Explanation of the thermostat's role in controlling spray water temperature.
Description of the heat exchanger's operation for hot water cleaning.
Instructions on how to use the machine's brake for stability.
Essential safety rules for operating the high-pressure cleaner.
Specifications for safe and correct electrical hookup.
Step-by-step guide to initial machine setup and operation.
Guidelines for connecting and maintaining spray accessories.
Instructions for connecting water supply and high-pressure hose.
How to operate the machine in cold water, hot water, and steam modes.
Procedure for using detergents and post-use rinsing.
How to set the output pressure using the control valve.
Measures to protect the machine from frost damage.
Scheduled checks and cleaning for optimal performance and longevity.
Steps for operating the cleaner using cold water.
Steps for operating the cleaner using hot water.
Diagnosing and resolving issues related to water intake.
Troubleshooting pump noise, pressure loss, and leaks.
Resolving problems with starting, switching off, or control functions.
Diagnosing why the burner may not heat the water.
Troubleshooting ignition failures and ventilator operation.
Resolving problems with spray gun leaks or detergent suction.
Details on warranty coverage, duration, and exclusions.
To Next Page