17
Direct suction
Sucking in water from ponds, rain butts etc.
Due the suction capacity of its pump (up to 2.5 m suction height) this high-pressure
cleaner can suck in water for cleaning purposes from separate containers or ponds.
In this case the water tank has to be disassembled.
1. Tip the water tank
2. Draw water tank from machine
3. Mount suction hose with suction filter
(Kränzle accessories No. 15.038 3).
When using other hoses the inner cross
section of the hose must be at least ½” =
12.7 mm.
Make sure to use
clean water only!
To Next Page
Loading...
