Need help?Do you have a question about the Kranzle Profi 195 TST and is the answer not in the manual?
General| Brand | Kranzle |
|---|---|
| Model | Profi 195 TST |
| Category | Pressure Washer |
| Language | English |
Details ergonomic features including handles and the trolley system.
Identifies main functional parts like gun, lances, hose drum, water inlet, and tank.
Explains the manometer, pressure control, detergent valve, and on/off switch.
The main Kränzle Profi high-pressure cleaner unit with hose drum and hose.
Includes safety spray gun, Dirtkiller lance, and washing lance.
Includes the operating manual and tiltable handle.
Defines the intended uses and limitations of the high-pressure cleaner.
Details mandatory periodic inspections by qualified personnel.
Provides guidelines to prevent injury during operation.
Explains the procedure and requirements for engine oil changes.
Advice on handling recoil and preventing unintentional spraying.
Guidance on safe use of underbody and angled lances.
Lists prohibited uses and handling practices for safety.
Highlights the danger of operating without sufficient water and required flow rates.
Details regulations and methods for connecting to water mains.
Discusses voltage, current, and cable specifications for safe operation.
Provides instructions for safely connecting the machine to the electrical supply.
Explains how water is processed and delivered for cleaning.
Details the function and safety features of the lance with trigger gun.
Describes the pressure control and safety valve's role in machine protection.
Explains the function of the motor protection switch for overload prevention.
Details the quality and connection requirements for the HP hose and spray device.
Describes the electrical Start/Stop control for automatic motor shutdown.
Guidance on location, filter check, and oil level check before operation.
Steps for attaching gun, lances, HP hose, and connecting water supply.
Instructions for connecting to power, adjusting pressure, and starting operation.
Explains how to draw water from ponds or tanks using the suction hose.
Instructions for removing the water tank for direct suction setup.
Details how the cleaner sucks detergent directly for efficient application.
Safety advice on using detergents and avoiding solvents.
Step-by-step guide for safely shutting down the machine and pump.
Advice on storing the cleaner in a space-saving manner.
Identifies a blocked nozzle as the likely cause for no water output with full pressure.
Steps for rinsing the hose and checking the water inlet filter.
Points to soiled valves as the probable cause for low pressure and erratic water flow.
Details how to disassemble, clean, and reassemble the valves.
Lists items to be checked during periodic safety inspections.
Sections for recording operational data and confirming inspection outcomes.
Lists the directives and standards the cleaner complies with.
Presents measured and guaranteed sound level values for the models.
Outlines conditions for warranty coverage and exclusions.
Specifies components considered wear parts not covered by warranty.
Details accessories like washing brushes and underbody lances.
Lists tube cleaning hoses and other specialized cleaning tools.
Features accessories like sludge suckers and round cleaners.
Describes the sand blasting attachment for intensive cleaning tasks.
An illustrated breakdown of all parts in the complete assembly.
Lists parts for the motor-pump unit, frame, and wheels.
Details spare parts for the spray gun, lances, and high-pressure hose.
Diagram and list of individual parts for the integrated AM-pump valve housing.
Detailed list of parts for the valve housing, excluding repair kits.
Information on available repair kits for the valve housing and pump valves.
Lists parts for the guide piston and repair kits for pressure switch mechanisms.
Details the complete pressure switch unit and its components.
Lists various O-rings, seals, and small components for the valve system.
Details pressure switches, electrical components, and complete valve housings.
Illustrates and lists individual parts of the motor unit.
Lists standard motor components like rotors, bearings, and fans.
Details parts specific to Profi 160/195 TST and Profi 175/15/120 TST models.
Diagram and list of parts for the machine's transmission system.
Lists components forming the hose drum assembly, excluding the hose itself.
Details the complete hose drum assembly without the high-pressure hose.
Lists parts for the Midi gun, including seals and nozzle protection.
Details different lance nozzles and available repair kits for the gun.
Diagram and list of parts for the Dirtkiller lance assembly.
Lists available repair sets for different Dirtkiller lance models.
Schematic showing the electrical connections for 230V Profi models.
Schematic showing the electrical connections for 400V Profi models.
To Next Page