Why is my Kranzle 11/130 pump making so much noise?
If your Kranzle Pressure Washer's high-pressure pump is excessively noisy, it might be sucking air. Inspect the suction connections to resolve this issue.
What to do if my Kranzle 11/130 Pressure Washer pressure is too low?
If the Kranzle Pressure Washer's operating pressure is too low, several factors could be responsible. Start by checking the suction connections, as the pump might be sucking air. Also, the manometer may be defective, so inspect or replace it. A worn high-pressure nozzle can also cause low pressure, so consider replacing it. Finally, the stainless steel seat, ball, and O-ring in the unloader could be dirty or defective, requiring cleaning or replacement.
General| Max Pressure | 130 bar |
|---|---|
| Flow Rate | 11 l/min |
| Power | 2.5 kW |
| Weight | 22 kg |
| Dimensions | 400 x 370 x 900 mm |
| Motor Speed | 2800 rpm |
| Power Supply | 230 V |
| Hose Length | 10 m |
| Voltage | 230 V |
To Next Page
