20
Small repairs - do it yourself
No water from the nozzle but the gauge shows full pressure:
Most likely the nozzle is blocked.
The pressure gauge shows full pressure,
but from the nozzle comes only little water
or no water at all.
(Inside the pressure gauge is no water but
a filling with glycol to damp the vibration of
the pointer.)
Screw off gun and lance and rinse hose
from possible residues
.
Check water inlet filter for soiling.
Take wire (paper clip) and push through
nozzle opening.
CAUTION! Pull plug from socket prior to starting
any repair work!
To Next Page
Loading...
