EasyManuals Logo

Kranzle therm 890 User Manual

Kranzle therm 890
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
Fuel System
Your fuel may contain particles of dirt, or impurities or water may get into the tank
during refuelling. Check the tank for impurities on a regular basis. Clean the tank
when necessary
Empty the fuel tank using the drainage screw at the bottom of the tank. Clean the
tank and fuel lines. Clean tank and fuel lines carefully and check to see whether
there are water droplets on the inside of the tank, because these must be removed.
Detergent and dirty fuel must be disposed of responsibly.
Care and Maintenance
Adjusting ignition electrodes
For a smooth ignition, the setting of the ignition electrode must be controlled
regularly.
Changing the oil
To do this, take the oil drainage hose (1)
connected to the oil drain screw, from the inside
of the machine and open the red oil filler cap on
the top side of the black oil reservoir. Open the
cap at the end of the hose. Drain off the oil into
an oil pan and dispose of it responsibly. Close
the end of the hose.
Refill with oil as described above.
Oil leakage
If oil leaks out, go to the nearest customer service immediately (dealer). (Environmen-
tal damages, transmission damages, loss of guarantee.)
Type of oil: Formula RS of Castrol - Quantity: 1.0 l
1
Check distance in mm
17

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kranzle therm 890 and is the answer not in the manual?

Kranzle therm 890 Specifications

General IconGeneral
BrandKranzle
Modeltherm 890
CategoryPressure Washer
LanguageEnglish

Related product manuals