To Next PageTo Next Page
Need help?Do you have a question about the Kraus Kore KWT321-15 and is the answer not in the manual?
Cut the opening in the countertop following the traced line.
Drill 3/8" diameter x 1/2" deep holes for anchors.
Apply silicone, place sink, press firmly, attach hardware, remove excess sealant.
Connect drain, trap, and water supply; check for leaks.
Cut the opening in the countertop following the traced line.
Drill 3/8" diameter x 1/2" deep holes for anchors.
Apply silicone, place sink, press firmly, attach hardware, remove excess sealant.
Connect drain, trap, and water supply; check for leaks.
General| Brand | Kraus |
|---|---|
| Model | Kore KWT321-15 |
| Category | Kitchen & Bath Fixtures |
| Language | English |
