Kraus KPF-1675 User Manual

8
3
6
Connect waterlines (6) to
hot and cold copper lines
(3). Connect waterlines
(6) to angle stops. Tighten
both ends of waterlines
with a wrench until snug.
Turn on hot and cold angle
stops and check for leaks
Step 6: Connect waterlines
Step 7: Flush spray hose
Remove spray head (1) from
spray hose (7). Hold tip of
spray hose (7). Turn faucet on
and let the water run for 60
seconds to ush any debris
1
7

Kraus KPF-1675 Specifications

General

Brand	Kraus
Model	KPF-1675
Category	Plumbing Product
Language	English