Kraus KPF-2110 - Prior to Installation; Tools You will Need

2
Prior to Installation
•
Make sure that the cold and hot water lines are turned o
• Wrap all threaded connections with Teon tape. Always wrap in a clockwise direction
• Cover your drain to avoid losing parts
• Do not disassemble the main faucet body, as it has been factory assembled by Kraus
for stress-free installation.
• Using condition: Working pressure at 0.05-1.0MPa (including cold & hot water
pressure) with applicable water temperature: 4C-90C
• Remove the check valve assembly (24) at the end of the hose (10)
• Discard plastic caps from the hot and cold inlets
Tools you will need:
Phillips
Screwdriver
Adjustable
Wrench