3. Key functions
Instruction manual
Introduktion til aGLOW.
Read the instruction manual quickly before use.
A. Main features and Technical Parameters
1. BT audio player
2. Hands free function
3.
Power Bank function
4. Φ3.5mm audio input interface
5. Audio Max power：5W*1
6. Frequency response: 20 Hz - 20 kHz
7. Max. power consumption: 1W
8. Built-in high capacity rechargeable Lithium ion-Battery.
9. Input: 5V/1A
10. Output: 5V/1A
11. Charging time: around 3-4 hours
12. Continue playing music about 20 hours when the built-in
lithium battery is fully charged.
13. Nightlight about 20 hours when built-in lithium battery is
fully charged.
14. Water resistance level: IPX4
B. Product Illustration
C. Key functions
D. BT playback
1. Press and hold the“ ”button for 2 seconds to turn on the
aGLOW. A blue LED status indicator will flash to indicate that
the product is activated.
2. Turn on the BT function on your mobile phone or BT device
and search for devices in the BT menu.
3. When "aGLOW" appears on the BT device list, select
"aGLOW" to establish pairing and connect.
(If a passkey is required, enter 0000).
When the pairing and connection is successful, you will hear a
“BIP” and the LED indicator is now slowly
flashing blue.
The aGLOW is now ready to play your favorite tunes.
Short Press “ ”to play music.
4. When the connection between your device and the aGLOW is
successful, and the speaker is playing, the music will be stopped
when you receive an incoming call.
One short press at the “ ”will answer the call and use the
aGLOW as a hands free device. One long press at“ / ”
will adjust the volume.
Please keep within 1-meter distance during the phone call.
Short-press“ ”to hang up the phone.
The aGLOW will automatically return to playing music.
To reject the incoming call, press and hold “ ”for 2 seconds.
To redial the previous call number, short-press “ ”twice.
5. If the pairing is unsuccessful or if there is no flash indicator
showing, please repeat step 1 to 3 for re-connection.
E. Audio input mode
1. Insert 3.5mm /mini jack audio cable into the audio input port.
MP3, IPOD, mobile phone or other audio products, which
features mini Jack cable, can be used.
The green indicator should now be on.
2. Press and hold“ / ” to adjust the volume.
3. In‘audio line-in’ mode, short-press “ ”to play/pause.
The skip / next-function is not available in this mode.
Please control music through your music device.
4. Pull out the audio cable to disconnect the aGLOW.
The aGLOW will switch back to BT mode and the blue status
indicator will flash.
The aGLOW will automatically pair with the last connected
device.
F. Power supply and Emergency Power Bank
1. Connect DC 5V adapter with the Micro USB for to recharge
the built-in rechargeable lithium battery. The red power indicator
will flash when the aGLOW is connected to power and charging.
When the aGLOW is
fully charged, the red indicator will light
continuously.
Disconnect the adapter when the aGLOW is fully charged.
2. The aGLOW features a high capacity lithium ion polymer
battery and can recharge your smartphone or any other device
that requires 5v1A.
The green indicator will light up when charging. When the green
indicator flashes, it means that the aGLOW is low on power.
3. Besides the BT connection, aGLOW can also be connected
through AUX/Line-in.
4. The speaker is powered by the built-in rechargeable battery.
When the speaker is charging and connected to power, it is not
affected whether the speaker is in ON or OFF.
5. The power bank function cannot be used when aGLOW is
connected to power and recharging.
G. Night Light function
1. The BT speaker is fitted with a night light function.
Press “ ”for light ON/OFF or press and hold “ ”to adjust
the dimmer function.
To Next Page
Loading...
Need help?
General
