Do you have a question about the KREAFUNK tRadio and is the answer not in the manual?
Brand | KREAFUNK |
---|---|
Model | tRadio |
Category | Speakers |
Type | Portable Bluetooth Speaker |
Bluetooth Version | 5.0 |
Battery Life | Up to 10 hours |
Charging Time | 3-4 hours |
Speaker | Yes |
FM Radio | Yes |
Water Resistance | IPX4 |
Material | Plastic |
Colors Available | Black |
720MM 50 OHM antenna.
Plug to AC adapter.
Connect to any music device via the AUX cable.
Connect earphones or other music devices with 3.5mm AUX connector.
Long press to turn the device on or off.
Switch between DAB, FM, and AUX modes.
Short press to check DAB/FM information.
Store and play DAB/FM presets; return from menu.
Access menu for settings, software version, or system reset.
Tune FM radio upwards or adjust menu settings.
Tune FM radio downwards or adjust menu settings.
Go to the previous track in Bluetooth mode.
Go to the next track in Bluetooth mode.
Play/pause music or initiate Bluetooth pairing.
Short press to switch to Bluetooth mode.
Adjust the volume level up and down.
Scan the full DAB range, store found stations, and play the first one.
Adjust frequency manually (5A-13F) and store stations.
Activate auto tuning upwards or downwards at 50KHz steps.
Step up or down 50KHz manually in FM mode.
Hold PRESET to enter save menu, select slot (P1-P32), and confirm.
Press PRESET to access recall menu and select stored stations (P1-P32).
Display information like Signal Strength, Program type, Frequency.
Access settings: Full scan, Manual Tune, DRC, Prune, System.
Auto sync time or set time/date manually.
Choose time update sources (DAB, FM, any).
Select the preferred time display format.
Set the preferred date display format.
Adjust volume via dial or connected audio devices.
Optimize signal reception and switch to mono for better quality.
Configure backlight timeout duration and dim level.
Choose the user interface language.
Restore the unit to its original factory settings.
Display the current software version of the unit.