Krell Industries 200c - Specifications

Specifications
Full Power Balanced 200c, 300c, 600c Stereo Amplifiers
FREQUENCY RESPONSE
SIGNAL TO NOISE RATIO
"A" WEIGHTED
GAIN
TOTAL HARMONIC
DISTORTION (THD)
ALL BALANCED, UNWEIGHTED
INPUT IMPEDANCE
INPUT SENSITI VITY
OUTPUT POWER
EACH CHANNEL DRIVEN
OUTPUT VOLTAGE
POWER CONSUMPTION
INPUTS
OUTPUTS
SPEAKER BINDING POSTS
REMOTE CONTROL
DIMENSIONS
INCHES
CENTIMETERS
FPB 200c
20 Hz to 20 kHz
+0 dB, -0.05 dB
0.1 Hz to 240 kHz
+0 dB, -3 dB
113 dB
FPB 300c
20 Hz to 20 kHz
+0 dB, -0.05 dB
0.1 Hz to 240 kHz
+0 dB, -3 dB
117 dB
26.4 dB
1 kHz <0.02%
20 kHz <0.15%
26.4 dB
1 kHz <0.02%
20 kHz <0.15%
100 kOhms
1.92 Vrms
8 Ohms 200 W
4 Ohms 400 W
2 Ohms 800 W
100 kOhms
2.35 Vrms
8 Ohms 300 W
4 Ohms 600 W
2 Ohms 1,200 W
Peak to Peak 138 V
Peak to Peak 170 V
RMS 49 V RMS 60 V
Stand-by
60 W
Idle 175 W
Max. 1,700 W
1 pair balanced via
XLR connectors
1 pair CAST Via 4-pin
bayonet connectors
4 pair (upper left,
lower left, upper right
lower right)
Stand-by 75 W
Idle 350 W
Max. 3,000 W
1 pair balanced via
XLR connectors
1 pair CAST via 4-oin
bayonet connectors
4 pair (upper left,
lower left, upper right
lower right)
FPB 600c
20 Hz to 20 kHz
+0 dB, -0.05 dB
0.1 Hz to 240 kHz
+0 dB, -3 dB
120 dB
26.4 dB
1 kHz <0.02%
20 kHz <0.15%
100kOhms
3.39 Vrms
8 Ohms 600W
4 Ohms 1,200 W-
2 Ohms 2,400 W
Peak to Peak 240 V
RMS 84 V
Stand-by
85 W
Idle 430 W
Max.
6,000 W
1 pair balanced via
XLR connectors
1 pair CAST via 4-pin
bayonet connectors
4 pair (upper left
lower left, upper right
lower right)
Optional Optional Optional
19.0w x 10.3h x 17.0d
48.3w x 26.2h x 43.2d
19.0w x 10.3h x 19.7d
48.3w x 26.2h x 50.0d
19.0w x 10.3hx 25.5d
48.3wx 26.2hx 64.8d
WEIGHT
SHIPPING 107.0 lb., 48.6 kg 127.0 lb., 57.7 kg 200.0 b., 90.9 kg
UNIT ONLY 90.0 lb., 40.9 kg 110.0 lb., 50.0 kg 180.0 lb., 81.8 kg
All operational features, functions, specifications, and policies are subject to change without notification.
22 Krell Full Power Balanced Power Amplifiers