Need help?Do you have a question about the Krell Industries KPS 28c and is the answer not in the manual?
Explains CAST principles, its advantages over traditional systems, and its integration with Krell Current Mode.
Covers unit placement, ventilation, disc handling, and AC power connection advice.
Outlines limited warranty, exclusions, service responsibilities, and product registration.
Lists detailed technical specs like frequency response, distortion, connectivity, dimensions, and weight.
Frequency Response| frequency response | 20 Hz-20 kHz +0.0, -0.6 dB |
|---|
Audio Performance| signal to noise ratio | 106 dB |
|---|---|
| total harmonic distortion (THD) 20 Hz-16 kHz | -86 dB |
| total harmonic distortion (THD) 20 kHz | -81 dB |
Power| power consumption | Idle 50 W |
|---|
Audio Outputs| analog audio outputs - balanced | 1 pair via XLR connectors |
|---|---|
| analog audio outputs - single-ended | 1 pair via RCA connectors |
| analog audio outputs - Krell CAST | 1 pair via 4-pin connectors |
Digital Audio Outputs| EIAJ optical output | 1 via a Toslink connector |
|---|---|
| S/PDIF coaxial output | 1 via an RCA connector |
Remote Control| wireless infrared remote control | 1 |
|---|---|
| 12 VDC input (12 Volt trigger) | via a 3.5 mm mini connector |
| RC-5 input | via a DC power connector |
Weight and Dimensions| dimensions | 19.0w x 4.4h x 14.5d in., 48.3w x 11.2h x 36.8d cm |
|---|---|
| shipping weight | 26.0 lb., 11.8 kg |
| unit weight | 23.5 lb., 10.7 kg |
To Next Page