TO ERASE FTS PROGRAM MEMORY
NOTE: FTS memory can only be erased via the front
panel controls. The remote control cannot erase FTS
memory.
NOTE: The disc does not have to be on the MD-10 to
~
rase FTS memory. Erasure can be completed with no
isc on the drive spindle.
~
. Press the FTS button on the front panel. Hold the .
u.tton in while pressingthe forward or backward track
select. You will notice t-he machine is scrolling through
F.TS designation.numbers. Once you have found the FTS
.designatio.n numt)er you want to erase, press the STOP
button and the program will be erased.
14
To Next Page