Basic Operation:
1. Press the Mute button briefly on the KRC-2.
2. Turn the volume control fully counterclockwise to the
Off position, no LED’s illuminated.
3. Turn the power amplifier On.
4. Choose a listening source and .select that input by
pushing the corresponding input button on the KRC-2.
5. Start play of the source.
turn6. Slowly _ the volume control clockwise until you
reach a comtortable listening level.
7. When changing sources, return to the Mu.te position
and or lower the volume. This insures that tlae next
source you play will not be potentially damaging to your
system witti a high output transient.
8. Enjoy
9
To Next Page
Loading...
