Need help?Do you have a question about the Krell Industries KCT and is the answer not in the manual?
General| Type | Stereo Preamplifier |
|---|---|
| Total Harmonic Distortion | < 0.005% at 1 kHz |
| Signal-to-Noise Ratio | > 95dB, A-weighted |
| Gain | 12 dB |
| Input Impedance | 47 kOhms |
| Inputs | Balanced XLR, Unbalanced RCA |
| Outputs | Balanced XLR, Unbalanced RCA |
| Frequency Response | 20Hz - 20kHz |
| Weight | 30 lbs |
Explains CAST operation and the construction of its specialized cables.
Advises on optimal unit placement and safe AC power connection practices.
Provides concise steps for connecting the KCT and performing basic operation.
Details the functions of power, remote sensor, and main preamplifier buttons.
Explains zone selection, display feedback, and menu navigation controls.
Lists and describes all analog, CAST, and tape I/O connectors.
Details control, trigger, phono power, and AC power connections.
Covers battery installation, power, amplifier, and preamplifier remote key functions.
Explains keys for zone selection, input switching, and volume/balance adjustment.
Step-by-step instructions for connecting the KCT to sources and amplifiers.
How to power the unit on, off, and manage stand-by status.
Steps for safely powering down the preamplifier and associated components.
To Next Page