Krell Industries KCT - Technical Specifications; Connectivity and Gain Specifications

Krell Current Tunnel 37
Specifications
Inputs 2 pr. CAST (Lemo)
2 pr. Balanced (XLR)
3 pr. Single-ended (RCA)
Main Outputs 2 pr. CAST (Lemo)
1 pr. Balanced (XLR)
1 pr. Single-ended (RCA)
Zone 2 Outputs 1 pr. Balanced (XLR)
1 pr. Single-ended (RCA)
Tape Loop 1 pr. Single-ended Inputs (RCA), 1 pr. Single-ended Record
Outputs (RCA), Buffered, with Programmable Zone
Control Inputs 1 RS-232 Input (9-pin D-subminiature Connector)
1 RC-5 Input (1/4-inch Coaxial Connector)
1 12V Trigger Input (3.5mm Connector)
Control Outputs 3 Individually Programmable 12V Triggers
(3.5mm Connector), 1 Krell Remote Link (5-pin DIN
Connector)
Power Inputs 1 IEC AC Mains Receptacle
Power Outputs 1 ±20V DC for KPE (9-pin D-subminiature Connector)
Voltage Gain 12 dB (Balanced Output),
6 dB (Single-ended Output)
Current Gain 12 dB (CAST Output)
Volume Controls 16-bit Discrete R-2R Ladder (Main Zone)
16-bit Multiplying DAC (Zone 2)
Input Overload 12 mA RMS CAST
12 V RMS Balanced or Single-ended
Output Overload 7 V RMS Single-ended
14 V RMS Balanced
14 mA RMS CAST