Need help?Do you have a question about the Krell Industries KAV-300IL and is the answer not in the manual?
Details the power button, power LED, stand-by LED, and infrared sensor.
Explains buttons for selecting analog sources and tape monitoring functions.
Details loudspeaker outputs, analog inputs, and analog outputs.
Explains RC-5, 12VDC trigger, IEC connector, and fuse details.
Describes the power and pre keys on the remote control.
Provides a step-by-step guide for connecting the amplifier to audio components.
Explains basic input selection and volume control from the front panel and remote.
Outlines the procedure for switching the amplifier between stand-by and operational modes.
Power| output voltage | 138 V |
|---|---|
| output power at 8 ohms | 200 W |
| output power at 4 ohms | 400 W |
| power consumption idle | 20 W |
| power consumption max | 1, 800 W |
| transformer | 750 VA |
Audio Specifications| frequency response | 20 Hz-20 kHz +0 dB, -0.07 dB |
|---|---|
| signal to noise ratio | 99 dB |
| total harmonic distortion at 1 kHz | <0.04% |
| total harmonic distortion at 20 kHz | <0.25% |
| gain | 35.8 dB |
Input/Output Specifications| input sensitivity | 0.644 Vrms |
|---|---|
| input impedance | 47 kOhms |
| output impedance | 0.17 Ohms |
Weight and Dimensions| dimensions | 17.3w x 3.5h x 17d in., 50w x 8.9h x 43.2d cm |
|---|---|
| shipping weight | 36.0 lb., 16.4 kg |
| unit weight | 31.0 lb., 14.1 kg |
To Next Page