Need help?Do you have a question about the Krell Industries KSA-50s and is the answer not in the manual?
General| Brand | Krell Industries |
|---|---|
| Model | KSA-50s |
| Category | Amplifier |
| Language | English |
Proper placement of the KSA-50S for optimal performance and ventilation.
Setting up remote power control for the amplifier from a different room.
Guidelines for cabinet placement, weight, and ventilation for the amplifier.
Requirements for dedicated power lines and compatible AC power conditioners.
Options for using amplifier feet and rubber bottoms for surface protection or rug use.
How to connect multiple KSA-50S units for synchronized operation.
Detailed instructions for connecting speaker cables and interconnects to the amplifier.
Guidelines for operating the KSA-50S amplifier and system.
Step-by-step process for turning the amplifier on safely.
Troubleshooting low-frequency hum in the audio system.
Explanation of the Sustained Plateau Biasing system and its display.
Function of the front panel button controlling the bias meter display.
How to use the optional remote control for power and meter functions.
Instructions for replacing batteries in the remote control.
Overview of the amplifier's protective circuits against DC, shorts, and anomalies.
Steps to diagnose and resolve amplifier power-on issues.
Discusses the feasibility and implications of leaving the amplifier powered on continuously.
Steps to take if the amplifier fails to power on after pressing the button.
Guidance on identifying and resolving speaker hum when the KSA-50S is connected.
Advice on using aftermarket power cords with the amplifier.
Explains how to resolve buzz issues when using single-ended inputs.
Instructions for linking multiple KSA-50S units for synchronized power control.
Clarification on why bias levels might differ between left and right channels.
To Next Page