Need help?Do you have a question about the KRESS BMH 1000 and is the answer not in the manual?
Attaching and securing the auxiliary handle to the machine.
Connecting the power cable module to the machine handle.
Procedures for activating, deactivating, and locking the on/off switch.
Selecting speed ranges and rotation stop modes.
Selector for switching between drilling and impact drilling.
Variable speed adjustment and pre-setting the speed.
Constant RPM maintenance and gradual start-up.
Changing the direction of rotation (forward/reverse).
Steps for inserting drilling and chiselling tools into the holder.
Procedure for detaching tools from the tool holder.
Rotating the chisel to the desired working position.
Instructions for attaching the drill chuck to the adapter.
Avoiding hidden lines and using metal detectors.
Using correct drills and adapting speed to material.
Wearing protective gear and proper chiselling technique.
Starting slowly and switching to impact mode.
Using screwdriver bits with the adapter.
Keeping ventilation slots clean and wiping parts.
Recommending service for heavy use or long periods.
Recycling electric tools and packaging.
Reading instructions, avoiding damaged cables, and using accessories.
Recommendations for wearing protective glasses and hearing protection.
Secure stance, firm grip, and avoiding material hazards.
List of numbered components of the pneumatic drill hammer.
Details on power, speed, capacity, and weight.
Measured noise and vibration levels according to EN 60 745.
Statements of conformity with European standards and directives.
Details on guarantee period, exclusions, and claim procedures.
List of conditions that void the warranty.
Buyer's rights for reduction or cancellation if defects persist.
To Next Page
General
