KRESS HMX 24 User Manual

Bedienungsanleitung 4
Operating Instructions 7
Mode d’emploi 10
Gebruiksaanwijzing 14
Manuale di servizio 17
Instrucciones de servicio 21
Bruksanvisning 25
Betjeningsvejledning 28
Bruksanvisning 31
Käyttöohje 34
Oδηγίεσ χρήσησ 37
D
GB
F
NL
I
E
S
DK
N
FIN
GR
HME 20
HMX 24
28408/0108 HD
HME 20/HMX 24 - Titel.book Seite 1 Mittwoch, 1. August 2001 11:27 11

KRESS HMX 24 Specifications

General

Brand	KRESS
Model	HMX 24
Category	Drill
Language	English

Summary

Safety Instructions and Accident Prevention

Illustration

Diagram showing the components of the tool.

Technical Data

Detailed specifications including article number, input power, output power, and speed ranges.

Noise/vibration information

Measured values for sound pressure, sound power, and workplace related emission.

Mounting the Auxiliary Handle and the Mains Cable Module

Putting into Operation

Switching On/Off

Instructions on how to turn the tool on, off, and lock the switch.

Mechanical Gear Selection

Explanation of the gear selector for different drilling modes and speeds.

Drilling - Impact Drilling

How to switch between drilling and impact drilling modes.

Speed Control

Variable speed control using the on/off switch.

Speed Preselection (HMX 24)

How to preselect speed using the knob on the HMX 24 model.

Rotational Direction Switching

How to change the direction of rotation.

Drill Chuck (Accessory)

Mounting the Chuck

Steps for attaching a drill chuck accessory to the tool.

Practical Tips

Impact Drilling - Chiseling

Advice on using impact drilling and chiseling modes safely.

Drilling in Tiles

Specific guidance for drilling through tiles.

Screwdriving

How to use the tool for screwdriving applications.

Maintenance Measures

Environmental Protection

Service-Anschriften / After sales service / Service après-vente