3. MAINTENANCE & CLEANING
Aer using for long a me, the dust cumulated in the dust lter or the cooling pad may
inuence the inow of air. Therefore it is recommended to clean your fan regularly.
Please follow the steps below to clean your device.
Turn o the unit and unplug the power cord before doing the cleaning and maintenance.
DUST FILTER
To remove the dust lter, rst remove the screw, then simply press the locks with both
hands and pull it out. Use neutral cleaning agent and brush to clean the dust and dirts
on the lter. To aach the clean lter, place the boom of the lter rst and then push
upper part unl it is locked ghtly.
COOLING PAD
Aer removing the dust lter you can see the cooling pad. Press the lock in the middle
and gently pull out the pad. Use a clean or so brush to remove the dust and dirt from
the pad. Rinse with water if needed and leave it to dry in open air. Never use any chemi-
cal cleaning soluon that can harm the pad.
WATER TANK
Turn the water tank lock to horizontal posion and pull the tank. Use so cleaning agents
for cleaning. Wash with water and rinse. Turn the lock to vercal posion.
EXTERIOR CLEANING
Clean the exterior case of the fan with a so damp cloth except the control panel.
Never use hard cleaning agents that can harm the case. Make sure the unit is dry before
operang it.
Cauon: Never let water contact with the control panel. Always clean it with a so dry
cloth.