KRHÜNER 60026 - How to Use; Parts Identification and Illustration; Understanding Evaporative Cooling

slowly and very lightly on the side of the unit to avoid water spills.
ො Make sure that the ice is not placed so that sunlight hits it.
ො Use the appliance on a at, dry surface.
NOTICE:
This product may temporarily produce an odour when rst turned on. This is
normal and will dissipate aer a few hours.
2. HOW TO USE
PARTS
1. Handle
2. Control pannel
3. Front pannel
4. Vertical louver
5. Horizontal louver
6. Side pannel
7. Back pannel
8. Water filling door
9. Water level lndicator
10. Water tank
11. Wheel
12. Drain assembly
EVAPORATIVE COOLING
Evaporave cooling is an
economical way to cool.
The air is cooled while
being drawn across wet
evaporave media. The movement of this fresh cooled air is what makes it feel cool. It is
important when using an evaporave cooler in an enclosed space to have
adequate exhaust by opening windows, doors, etc. Without an outlet to exhaust the air,
humidity will build up in the enclosed space and the unit will not cool adequately. It is
preferable to have an opening behind the unit to bring in fresh air and another opening