KRHÜNER 60026 - Optimal Location for Operation; Daily Filter Drying and Winter Storage; Assembling the Wheels

across the room to exhaust and help move the air.
LOCATION
A. Your cooler must be posioned in front of an open window or door to operate eec-
vely.
B. Always ensure that there is another open window or door which the air can exhaust
from the room.
C. Ensure the lter is kept clean throughout the summer season.
D. At the end of each day run your cooler on “Air” mode only for 30 minutes to dry out
the lter.
E. Prior to pung your cooler away for winter, always:
• Drain the tank and wipe out clean.
• Clean the lter.
• Reassemble and run on “Air” mode only for 30 minutes to dry out the lter.
Noce: having completed the assembly of your cooler, place the unit with its back on an
open window or door. This will allow fresh air to be drawn through the cooler and ex-
hausted from the room. Constant air change is essenal and part of the fresh air benets
from evaporave air cooling.
Remember your cooler has been designed to operate even if it runs out of water. No
damage will be caused to the pump if your cooler runs out of water.
Wheels assembling
Take out the 4 wheels and fix them as indicated on the picture.
Make sure the 2 wheels with lock are in the same direction as the front pannel.