slow blinking in red should start blinking purple.
Press the button “add hub”.
Enter the password of the Wi-Fi network
with which the hub is to cooperate.
the “Connector” hub.
Enter the name of the new hub. Installation complete.
3. PRODUCT PARAMETERS
1 2
3
5 6
4
Indoor use only: Wi-Fi: 2,4 4 ГГц (802.11b / n / g)
Power consumption: DC 5 V / 1 A (USB type A)
Radio frequency: 433,92 MHz
Working temperature: 0 ° C ~ 40 ° C
Dimensions (mm): L132,2 * W75 * H36
4. INDICATOR STATUS
5. START-UP
Colour Meaning Duration
Constant blue Constant
Flashing red slowly No connection to Wi-Fi Till the update of the status
Flashing yellow slowly Connecting to Wi-Fi Till the update of the status
Flashing red quickly Bridge reset 5 times
Flashing purple slowly Pairing Till the update of the status
Flashing green slowly Update is in progress Till the update of the status
2s
red
purple
purplepurple
blueblueblue
To Next Page
Loading...