3 Safety
This section provides an overview over all important safety aspects for safe and trouble-free
operation of the unit.
The individual chapter additionally contain actual safety notes highlighted with symbols,
which will help to avoid immediate dangers.
3.1 General
The machine is built according to the currently applicable rules of technology and is safe to
operate.
However, dangers may still arise from the unit if it is incorrectly operated or used for
purposes it is not intended for.
The Kröber O2 oxygen concentrator may only be used if the present operating instructions
have been read and understood before commissioning the device and if instruction has been
given by trained personnel (service technicians, etc.). Knowing the content of these
instructions for use is a prerequisite for the avoidance of mistakes and for safe and trouble-
free operation of the unit.
Neither changes nor conversions may be carried out on the equipment, which have not been
explicitly authorized by the manufacturer, to avoid dangers and to ensure optimal
performance.
All safety decals and operating signs on the unit must be kept well legible at all times.
Damaged or illegible decals must be replaced immediately.
3.2 Operators responsibility
These instructions for use must be kept near the unit, so that it is available for the user at any
time.
Apart from the notes on safety mentioned in this manual, all generally valid safety and
accident prevention instructions must also be observed and adhered to.
The machine may only be operated in a technically perfect condition and if operationally
safe.
The information contained in the instruction manual is complete and must be adhered to
without limitation.